2-3
Parameters
directory: The path of the folder for saving the saved configuration file, a case insensitive string of 1 to
63 characters, in the format of storage medium name:/[folder name]/subfolder name. The folder must
be created before the configuration.
filename-prefix: The filename prefix of a saved configuration file, a case insensitive string of 1 to 30
characters (can include letters, numbers, _, and - only).
Description
Use the archive configuration location command to configure the path and filename prefix of a saved
configuration file.
Use the undo archive configuration location command to restore the default.
By default, the path and filename prefix of a saved configuration file are not configured, and the system
does not save the configuration file periodically.
Note the following:
z Before the current running configuration is saved either manually or automatically, the file path and
filename prefix must be configured.
z If the undo archive configuration location command is executed, the current running
configuration can neither be saved manually nor automatically, and the configuration by executing
the archive configuration interval and archive configuration max commands restores to the
default, meanwhile, the saved configuration files are cleared.
Examples
# Configure the path and the filename prefix of a saved configuration file as flash:/archive/ and
my_archive respectively.
<Sysname> mkdir archive
.
%Created dir flash:/archive.
<Sysname> system-view
[Sysname] archive configuration location flash:/archive filename-prefix my_archive
archive configuration max
Syntax
archive configuration max file-number
undo archive configuration max
View
System view
Default Level
3: Manage level
To Next Page
Loading...
Need help?
General