EasyManuals Logo

H3C S5120-SI Series Command Reference

H3C S5120-SI Series
910 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #816 background imageLoading...
Page #816 background image
1-23
cluster-mac
Syntax
cluster-mac mac-address
undo cluster-mac
View
Cluster view
Default Level
2: System level
Parameters
mac-address: Multicast MAC address (in hexadecimal in the format of H-H-H), which can be
0180-C200-0000, 0180-C200-000A, 0180-C200-0020 through 0180-C200-002F, or 010F-E200-0002.
Description
Use the cluster-mac command to configure the destination MAC address for cluster management
protocol packets.
Use the undo cluster-mac command to restore the default.
By default, the destination MAC address for cluster management protocol packets is 0180-C200-000A.
Note that this command can be executed on the management device only.
Examples
# Set the destination MAC address of the cluster management protocol packets to 0180-C200-0000 on
the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] cluster-mac 0180-C200-0000
cluster-mac syn-interval
Syntax
cluster-mac syn-interval interval
View
Cluster view
Default Level
2: System level

Table of Contents

Other manuals for H3C S5120-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5120-SI Series and is the answer not in the manual?

H3C S5120-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5120-SI Series
CategorySwitch
LanguageEnglish

Related product manuals