1-33
display cluster candidates
Syntax
display cluster candidates [ mac-address mac-address | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
mac-address mac-address: Specifies the MAC address of a candidate device, in the format of H-H-H.
verbose: Displays the detailed information about a candidate device.
Description
Use the display cluster candidates command to display the information about the candidate devices
of a cluster.
Note that the command can be executed on the management device only.
Examples
# Display the information about all the candidate devices.
<aaa_0.Sysname> display cluster candidates
MAC HOP IP Device
00e0-fc00-3199 3 S5120
000f-cbb8-9528 1 31.31.31.56/24 S5120
# Display the information about a specified candidate device.
<aaa_0.Sysname> display cluster candidates mac-address 00e0-fc61-c4c0
Hostname : LSW1
MAC : 00e0-fc61-c4c0
Hop : 1
Device : Sysname S5120
IP : 1.5.6.9/16
# Display the detailed information about all the candidate devices.
<aaa_0.Sysname> display cluster candidates verbose
Hostname : 3100_4
MAC : 00e0-fc00-3199
Hop : 3
Device : S5120
IP :
Hostname : Sysname
MAC : 000f-cbb8-9528
Hop : 1
To Next Page
Loading...
Need help?
General