1-6
[Sysname-pkey-key-code]FF1877A5E2E7B1FA4710DB0744F66F6600EEFE166F1B854E2371D5B952ADF6B80
EB5F52698FCF3D6
[Sysname-pkey-key-code]1F0C2EAAD9813ECB16C5C7DC09812D4EE3E9A0B074276FFD4AF2050BD4A9B1DDE
675AC30CB020301
[Sysname-pkey-key-code]0001
[Sysname-pkey-key-code] public-key-code end
[Sysname-pkey-public-key]
public-key local create
Syntax
public-key local create { dsa | rsa }
View
System view
Default Level
2: System level
Parameters
dsa: DSA key pair.
rsa: RSA key pair.
Description
Use the public-key local create command to create local key pair(s).
Note that:
z When using this command to create DSA or RSA key pairs, you will be prompted to provide the
length of the key modulus. The modulus length is in the range 512 to 2048 bits, and defaults to
1024 bits. If the type of key pair already exists, the system will ask you whether you want to
overwrite it.
z The local key pairs created with the public-key local create command are saved automatically
and can survive a reboot.
Related commands: public-key local destroy, display public-key local public.
Examples
# Create local RSA key pairs.
<Sysname> system-view
[Sysname] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++
++++++
To Next Page
Loading...
Need help?
General