1-17
Parameters
remotefile: Name of the file to be downloaded.
localfile: File name used after a file is downloaded and saved locally. If this argument is not specified,
the file is saved locally using the source file name to the current working directory, namely the directory
where the user executes the ftp command.
Description
Use the get command to download a file from a remote FTP server and save it.
Examples
# Download file testcfg.cfg and save it as aa.cfg.
[ftp] get testcfg.cfg aa.cfg
227 Entering Passive Mode (192,168,1,50,17,163).
125 ASCII mode data connection already open, transfer starting for /testcfg.cfg.
.....226 Transfer complete.
FTP: 5190 byte(s) received in 7.754 second(s), 669.00 byte(s)/sec.
lcd
Syntax
lcd
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the lcd command to display the local working directory of the FTP client.
Examples
# Display the local working directory.
[ftp] lcd
FTP: Local directory now flash:/clienttemp.
The above information indicates that the working directory of the FTP client before execution of the ftp
command is flash:/clienttemp.
ls
Syntax
ls [ remotefile [ localfile ] ]
To Next Page
Loading...
Need help?
General