1-7
Parameters
None
Description
Use the copyright-info enable command to enable the display of copyright information.
Use the undo copyright-info enable command to disable the display of copyright information.
By default, the display of copyright information is enabled.
Examples
# Enable the display of copyright information
<Sysname> system-view
[Sysname] copyright-info enable
z If a user logs in to the device through Telnet, the following information is displayed:
****************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
<Sysname>
z If a user has already logged in through the console port, and then quits user view, the following
information is displayed:
**************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
User interface aux0 is available.
Please press ENTER.
display clipboard
Syntax
display clipboard
View
Any view
Default Level
1: Monitor level
To Next Page
Loading...
Need help?
General