H3C S5120-SI Series Command Reference

1-2
Attribute: Host Port
Host port(s):total 1 port.
GE1/0/2 (D) ( 00:03:23 )
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port.
GE1/0/2
Table 1-1 display igmp-snooping group command output description
Field Description
Total 1 IP Group(s). Total number of IP multicast groups
Total 1 IP Source(s). Total number of multicast sources
Total 1 MAC Group(s). Total number of MAC multicast groups
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Port flags: D for dynamic port, S for static port, C for port copied
from a (*, G) entry to an (S, G) entry
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flags: R for real egress sub-VLAN under the current
entry, C for sub-VLAN copied from a (*, G) entry to an (S, G) entry
Router port(s) Number of router ports
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or
router port.
IP group address Address of IP multicast group
(0.0.0.0, 224.1.1.1) An (S, G), where 0.0.0.0 implies any multicast source
MAC group address Address of MAC multicast group
Attribute Attribute of IP multicast group
Host port(s) Number of member ports
display igmp-snooping statistics
Syntax
display igmp-snooping statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display igmp-snooping statistics command to view the statistics information of IGMP
messages learned by IGMP snooping.

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English