EasyManuals Logo

H3C S5120-SI Series Command Reference

H3C S5120-SI Series
910 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #424 background imageLoading...
Page #424 background image
1-15
configured by the dot1x timer reauth-period command). This is intended to track the connection
status of online users and update the authorization attributes assigned by the server, such as the ACL,
VLAN, and QoS Profile, ensuring that the users are in normal online state.
Related commands: dot1x timer reauth-period.
Examples
# Enable the 802.1X re-authentication function on GigabitEthernet 1/0/1 and configure the periodic
re-authentication interval as 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x re-authenticate
dot1x retry
Syntax
dot1x retry max-retry-value
undo dot1x retry
View
System view
Default Level
2: System level
Parameters
max-retry-value: Maximum number of attempts to send an authentication request to a client, in the
range 1 to 10.
Description
Use the dot1x retry command to set the maximum number of attempts to send an authentication
request to a client.
Use the undo dot1x retry command to restore the default.
By default, the device can send an authentication request to a client twice at most.
Note that after sending an authentication request to a client, the device may retransmit the request if it
does not receive any response at an interval specified by the username request timeout timer or client
timeout timer. The number of retransmission attempts is one less than the value set by this command.
Related commands: display dot1x.
Examples
# Set the maximum number of attempts to send an authentication request to a client as 9.
<Sysname> system-view
[Sysname] dot1x retry 9

Table of Contents

Other manuals for H3C S5120-SI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5120-SI Series and is the answer not in the manual?

H3C S5120-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5120-SI Series
CategorySwitch
LanguageEnglish

Related product manuals