1-31
Info: Current terminal monitor is on.
terminal trapping
Syntax
terminal trapping
undo terminal trapping
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the terminal trapping command to enable the display of trap information on the current terminal.
Use the undo terminal trapping command to disable the display of trap information on the current
terminal.
By default, the display of trap information on the current terminal is enabled.
Note that:
z The trap information is displayed (using the terminal trapping command) only after the monitoring
of system information is enabled on the current terminal first (using the terminal monitor
command).
z The configuration of this command is valid for only the current connection between the terminal and
the device. If a new connection is established, the display of trap information on the terminal
restores the default.
Examples
# Enable the display of trap information on the current terminal.
<Sysname> terminal trapping
Info: Current terminal trapping is on.
To Next Page
Loading...
Need help?
General