4-1
4 Congestion Management Configuration
Commands
Congestion Management Configuration Commands
display qos wrr interface
Syntax
display qos wrr interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display qos wrr interface command to display the queuing configuration on an interface.
If no interface is specified, the queuing configuration of all the interfaces is displayed.
Related commands: qos wrr.
Examples
# Display the WRR queuing configuration of GigabitEthernet 1/0/1.
<Sysname> display qos wrr interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue: Weighted round robin queue
Queue ID Group Weight
-------------------------------------
0 1 10
1 sp N/A
2 sp N/A
3 2 30
Table 4-1 display qos wrr interface command output description
Field Description
Interface Interface type and interface number
Output queue Pattern of the current output queue
To Next Page
Loading...
Need help?
General