1-17
Parameters
all: Specifies to send messages to all user interfaces.
type: User interface type.
number: Absolute user interface index or relative user interface index.
z Relative user interface index: If you provide the type argument, the number argument indicates the
user interface index of the type. When the type is AUX, number is 0; when the type is VTY, number
ranges from 0 to 15.
z Absolute user interface index: If you do not provide the type argument, the number argument
indicates the absolute user interface index, and ranges from 0 to 16.
Description
Use the send command to send messages to a specified user interface or all user interfaces.
Examples
# Send messages to all user interfaces.
<Sysname> send all
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello^Z
Send message? [Y/N]y
<Sysname>
***
***
***Message from vty0 to vty0
***
hello
<Sysname>
set authentication password
Syntax
set authentication password { cipher | simple } password
undo set authentication password
View
User interface view
Default Level
3: Manage level
Parameters
cipher: Specifies to display the local password in encrypted text when you display the current
configuration.
simple: Specifies to display the local password in plain text when you display the current configuration.
To Next Page
Loading...
Need help?
General