H3C S5120-SI Series Command Reference

2-2
free web-users
Syntax
free web-users { all | user-id userid | user-name username }
View
User view
Parameter
userid: Web user ID.
username: User name of the Web user. This argument can contain 1 to 80 characters.
all: Specifies all Web users.
Description
Use the free web-users command to disconnect a specified Web user or all Web users by force.
Example
# Disconnect all Web users by force.
<Sysname> free web-users all
ip http acl
Syntax
ip http acl acl-number
undo ip http acl
View
System view
Parameter
acl-number: ACL number ranging from 2,000 to 2,999.
Description
Use the ip http acl command to apply an ACL to filter Web users.
Use the undo ip http acl command to disable the switch from filtering Web users using the ACL.
Example
# Apply ACL 2000 to filter Web users (assuming that ACL 2,000 already exists.)
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ip http acl 2000

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English