1-5
Description
Use the ssh server authentication-timeout command to set the SSH user authentication timeout
period on the SSH server.
Use the undo ssh server authentication-timeout command to restore the default.
By default, the authentication timeout period is 60 seconds.
Related commands:
display ssh server.
Examples
# Set the SSH user authentication timeout period to 10 seconds.
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
ssh server compatible-ssh1x enable
Syntax
ssh server compatible-ssh1x enable
undo ssh server compatible-ssh1x
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ssh server compatible-ssh1x command to enable the SSH server to support SSH1 clients.
Use the undo ssh server compatible-ssh1x command to disable the SSH server from supporting
SSH1 clients.
By default, the SSH server supports SSH1 clients.
This configuration takes effect only for users logging in after the configuration.
Related commands: display
ssh server.
Examples
# Enable the SSH server to support SSH1 clients.
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
To Next Page
Loading...
Need help?
General