1-43
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] management-vlan synchronization enable
nm-interface vlan-interface
Syntax
nm-interface vlan-interface interface-name
View
Cluster view
Default Level
2: System level
Parameters
interface-name: ID of the VLAN interface. The value range is the same as that of the existing VLAN
interface ID.
Description
Use the nm-interface vlan-interface command to configure the VLAN interface of the access
management device (including FTP/TFTP server, management host and log host) as the network
management interface of the management device.
Examples
# Configure VLAN-interface 1 as the network management interface.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] nm-interface vlan-interface 1
reboot member
Syntax
reboot member { member-number | mac-address mac-address } [ eraseflash ]
View
Cluster view
Default Level
2: System level
Parameters
member-number: Number of the member device, in the range 1 to 255.
mac-address mac-address: MAC address of the member device to be rebooted, in the format of
H-H-H.
eraseflash: Deletes the configuration file when the member device reboots.
To Next Page
Loading...
Need help?
General