1-9
Electrical label information is also called permanent configuration data or archive information, which is
written to the storage medium of the device during debugging or test of a device. The information
includes name of the device serial number, and vendor name. This command displays part of the
electrical label information of the device.
Examples
# Display electrical label information. (The output of this command varies with devices.)
DEVICE_NAME : S5120-28P-SI
DEVICE_SERIAL_NUMBER : DPPMWWB123456
MAC_ADDRESS : 000F-E26A-58EA
MANUFACTURING_DATE : 2007-11-10
VENDOR_NAME : H3C
Table 1-4 display device manuinfo command output description
Field Description
DEVICE_NAME Device name
DEVICE_SERIAL_NUMBER Device serial number
MAC_ADDRESS MAC address of the device
MANUFACTURING_DATE Manufacturing date of the device
VENDOR_NAME Vendor name
display environment
Syntax
display environment
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display environment command to display the temperature information, including the current
temperature and temperature thresholds.
Examples
# Display the temperature information of the device.
<Sysname> display environment
System temperature information (degree centigrade):
-------------------------------------------------------------------------------
To Next Page
Loading...
Need help?
General