1-5
accounting login
Syntax
accounting login { local | none | radius-scheme radius-scheme-name [ local ] }
undo accounting login
View
ISP domain view
Default Level
2: System level
Parameters
local: Performs local accounting. It is not used for charging purposes, but for collecting statistics on and
limiting the number of local user connections.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the accounting login command to configure the accounting method for login users.
Use the undo accounting login command to restore the default.
By default, the default accounting method is used for login users.
Note that:
z The RADIUS scheme specified for the current ISP domain must have been configured.
z Accounting is not supported for login users’ FTP services.
Related commands: accounting default, radius scheme.
Examples
# Configure the default ISP domain system to use the local accounting method for login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting login local
# Configure ISP domain test to use RADIUS accounting scheme rd for login users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login radius-scheme rd local
accounting optional
Syntax
accounting optional
undo accounting optional
To Next Page
Loading...
Need help?
General