1-17
display dhcp relay security tracker
Syntax
display dhcp relay security tracker
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp relay security tracker command to display the interval for refreshing dynamic
bindings on the relay agent.
Examples
# Display the interval for refreshing dynamic bindings on the relay agent.
<Sysname> display dhcp relay security tracker
Current tracker interval : 10s
The interval is 10 seconds.
display dhcp relay server-group
Syntax
display dhcp relay server-group { group-id | all }
View
Any view
Default Level
1: Monitor level
Parameters
group-id: Displays the information of the specified DHCP server group numbered from 0 to 19.
all: Displays the information of all DHCP server groups.
Description
Use the display dhcp relay server-group command to display the configuration information of a
specified or all DHCP server groups.
Examples
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
To Next Page
Loading...
Need help?
General