H3C S5120-SI Series Command Reference

1-11
Field Description
Role change
A role change of the port (“Age” means that the change was caused by
expiry of the received configuration BPDU)
Time Time of port role calculation
Port priority Port priority
display stp ignored-vlan
Syntax
display stp ignored-vlan
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display stp ignored-vlan command to display VLAN Ignore enabled VLANs.
Examples
# Display VLAN Ignore enabled VLANs.
<Sysname> display stp ignored-vlan
STP-Ignored VLAN: 1 to 2
Table 1-7 display stp ignored-vlan command output description
Field Description
STP-Ignored VLAN List of VLAN Ignore enabled VLANs
display stp region-configuration
Syntax
display stp region-configuration
View
Any view
Default Level
1: Monitor level

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English