1-5
[Sysname-classifier-class2] if-match source-mac 0050-ba27-bed2
# Define a match criterion for class class1 to match ACL 3101.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match acl 3101
# Define a match criterion for class class1 to match the ACL named flow.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match acl name flow
# Define a match criterion for class class1 to match all packets.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match any
# Define a match criterion for class class1 to match the packets with DSCP values 1, 6 or 9.
<Sysname> system-view
[Sysname] traffic classifier class1 operator or
[Sysname-classifier-class1] if-match dscp 1
[Sysname-classifier-class1] if-match dscp 6
[Sysname-classifier-class1] if-match dscp 9
# Define a match criterion for class class1 to match the packets with an IP precedence of 1 or 6.
<Sysname> system-view
[Sysname] traffic classifier class1 operator or
[Sysname-classifier-class1] if-match ip-precedence 1
[Sysname-classifier-class1] if-match ip-precedence 6
# Define a match criterion for class class1 to match the packets with customer network VLAN ID 1, 6, or
9.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match customer-vlan-id 1 6 9
# Change the match criterion of class class1 from ACL 2008 to ACL 2009.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] undo if-match acl 2008 update acl 2009
traffic classifier
Syntax
traffic classifier tcl-name [ operator { and | or } ]
undo traffic classifier tcl-name
View
System view
To Next Page
Loading...
Need help?
General