1-21
[Sysname] tcp timer check-state 40
tcp timer fin-timeout
Syntax
tcp timer fin-timeout time-value
undo tcp timer fin-timeout
View
System view
Default Level
2: System level
Parameters
time-value: Length of the TCP finwait timer in seconds, in the range 76 to 3,600.
Description
Use the tcp timer fin-timeout command to configure the length of the TCP finwait timer.
Use the undo tcp timer fin-timeout command to restore the default.
By default, the length of the TCP finwait timer is 675 seconds.
Note that the actual length of the finwait timer is determined by the following formula:
Actual length of the finwait timer = (Configured length of the finwait timer – 75) + configured length of the
synwait timer
Related commands: tcp timer syn-timeout, tcp window.
Examples
# Set the length of the TCP finwait timer to 800 seconds.
<Sysname> system-view
[Sysname] tcp timer fin-timeout 800
tcp timer syn-timeout
Syntax
tcp timer syn-timeout time-value
undo tcp timer syn-timeout
View
System view
Default Level
2: System level
Parameters
time-value: TCP finwait timer in seconds, in the range 2 to 600.
To Next Page
Loading...
Need help?
General