1-1
1 SSL Configuration Commands
SSL Configuration Commands
ciphersuite
Syntax
ciphersuite [ rsa_aes_128_cbc_sha | rsa_des_cbc_sha | rsa_rc4_128_md5 | rsa_rc4_128_sha ] *
View
SSL server policy view
Default Level
2: System level
Parameters
rsa_aes_128_cbc_sha: Specifies the key exchange algorithm of RSA, the data encryption algorithm of
128-bit AES_CBC, and the MAC algorithm of SHA.
rsa_des_cbc_sha: Specifies the key exchange algorithm of RSA, the data encryption algorithm of
DES_CBC, and the MAC algorithm of SHA.
rsa_rc4_128_md5: Specifies the key exchange algorithm of RSA, the data encryption algorithm of
128-bit RC4, and the MAC algorithm of MD5.
rsa_rc4_128_sha: Specifies the key exchange algorithm of RSA, the data encryption algorithm of
128-bit RC4, and the MAC algorithm of SHA.
Description
Use the ciphersuite command to specify the cipher suite(s) for an SSL server policy to support.
By default, an SSL server policy supports all cipher suites.
Note that:
z With no keyword specified, the command configures an SSL server policy to support all cipher
suites.
z If you execute the command repeatedly, the last one takes effect.
Related commands: display ssl server-policy.
Examples
# Configure SSL server policy policy1 to support cipher suites rsa_rc4_128_md5 and
rsa_rc4_128_sha.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] ciphersuite rsa_rc4_128_md5 rsa_rc4_128_sha
To Next Page
Loading...
Need help?
General