H3C S5120-SI Series Command Reference

3-10
Examples
# Display the Option 82 configuration information of all interfaces.
<Sysname> display dhcp-snooping information all
Interface: GigabitEthernet1/0/1
Status: Enable
Strategy: Replace
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: aabbcc
User defined:
Circuit ID: company001
display dhcp-snooping packet statistics
Syntax
display dhcp-snooping packet statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp-snooping packet statistics command to display DHCP packet statistics on the
DHCP snooping device.
Related commands: reset dhcp-snooping packet statistics.
Examples
# Display DHCP packet statistics on the DHCP snooping device.
<Sysname> display dhcp-snooping packet statistics
DHCP packets received : 100
DHCP packets sent : 200
Packets dropped due to rate limitation : 20
Dropped invalid packets : 0
display dhcp-snooping trust
Syntax
display dhcp-snooping trust

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English