2-2
Default Level
3: Manage level
Parameters
new: Specifies the MIB style of the device as H3C new; that is, both sysOID and private MIB of the
device are located under the H3C enterprise ID 25506.
compatible: Specifies the MIB style of the device as H3C compatible; that is, sysOID of the device is
located under the H3C enterprise ID 25506, and private MIB is located under the enterprise ID 2011.
Description
Use the mib-style command to set the MIB style of the device.
By default, the MIB style of the device is new.
Note that the configuration takes effect only after the device reboots.
Examples
# Modify the MIB style of the device as compatible.
<Sysname> system-view
[Sysname] mib-style compatible
[Sysname] quit
<Sysname> display mib-style
Current MIB style: new
Next reboot MIB style: compatible
<Sysname> reboot
To Next Page
Loading...
Need help?
General