NEC Univerge SV9100 - DT800;DT700 Network Setup

Issue 4.0
2-82 Program 10 : System Configuration Setup
Description
Use Program 10-58 : DT800/DT700 Network Setup to set the local network address when the SIP
multiline terminal connects the system via a local router.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-58 : DT800/DT700 Network Setup
Level:
IN
Input Data
Area Table 1~8
Item
No.
Item Input Data Default
Related
Program
01
Network
Address
Sets local
network address.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 10-46-14
02
Subnet Mask
Sets local subnet
mask.
248.0.0.0 / 252.0.0.0 / 254.0.0.0 / 255.0.0.0
255.128.0.0 / 255.192.0.0 / 255.224.0.0
255.240.0.0 / 255.248.0.0 / 255.252.0.0
255.254.0.0 / 255.255.0.0 / 255.255.128.0
255.255.192.0 / 255.255.224.0
255.255.240.0 / 255.255.248.0
255.255.252.0 / 255.255.254.0
255.255.255.0 / 255.255.255.128
255.255.255.192 / 255.255.255.224
255.255.255.240 / 255.255.255.248
255.255.255.252 / 255.255.255.254
0.0.0.0 10-46-14