NEC Univerge SV9100 - Program 20: System Option Setup; System Options

SV9100 Programming Manual 2-247
Program: 20
Description
Use Program 20-01 : System Options to set various system options.
Program 20 : System Option Setup
20-01 : System Options
Level:
IN
Input Data
Item
No.
Item Input Data Default Description
Related
Program
01
Operator Access
Mode
0 = Step Call
1 = Circular
0
Set up priority of a call when calling
an operator telephone.
20-17
02
Text Message
Mode
0 = Call mode
1 = No Answer/Busy
mode
1
Select the mode when calling the
telephone which set up the text
message.
11-11-14
15-07-08
04
Network BLF
Indication
0~64800 seconds
0
Used to determine how often the
UX5000/SV9100 updates the DSS
key BLF indications. For NetLink,
the entry should be 30 in all
UX5000/SV9100 systems.
05
DTMF Receive
Active Time
0~64800 seconds
10
For OPXs, analog telephones and
certain analog trunks (like DISA), the
system attaches a DTMF receiver to
the port for this time. The system
releases the receiver after the time
expires.
25-07-01
06
Alarm Duration
0~64800 seconds
30
This time sets the duration of the
alarm signal.
11-12-05
07
Callback Ring
Duration Time
0~64800 seconds
15
Callback rings an extension for this
time.
11-12-05
15-07-35
08
Trunk Queuing
Callback Time
0~64800 seconds
15
Trunk Queuing callback rings an
extension for this time.
11-12-05
15-07-35
09
Callback/Trunk
Queuing Cancel
Time
0~64800 seconds
64800
The system cancels an extension
Callback or Trunk Queuing request
after this time.
11-12-05
15-07-35
10
Trunk Guard Timer
0~64800 seconds
1
The time the system waits to seize
the next outside line after the system
releases an outside line.
12
Telephone/Web
Pro Logout Time
1~84600 seconds
(84600 sec = 1 day)
900
The system automatically logs out of
a Telephone/Web Pro session after
inactivity lasting this time.