NEC Univerge SV9100 - Time and Date

SV9100 Programming Manual 2-3
Program: 10
Description
Use Program 10-01 : Time and Date to change the system Time and Date through system programming.
Extension users can also dial Service Code 828 to change the time if allowed by an extension Class of
Service.
Conditions
None
Feature Cross Reference

Clock/Calendar Display
Program 10 : System Configuration Setup
10-01 : Time and Date
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
Year
13~97 No Setting Enter 2 digits for year (13~97).
02
Month
01~12 No Setting Enter 2 digits (01~12) for the month.
03
Day
01~31 No Setting Enter 2 digits (01~31) for the day.
04
Week
1~7
(Sun~Sat)
No Setting Enter digit for the day of the week
(1=Sunday, 7=Saturday).
05
Hour
00~23 No Setting Enter 2 digits for the hour (00~23).
06
Minute
00~59 No Setting Enter 2 digits for the minute (00~59).
07
Second
00~59 No Setting Enter 2 digits for the second
(00~59).