NEC Univerge SV9100 - DTMF Tone Receiver Setup - 3

Issue 4.0
2-696 Program 80 : Basic Hardware Setup for System
Description
Use Program 80-14 : MF Tone Receiver Setup -3 to set further data for the DTMF signal detection.
Conditions
None
Feature Cross Reference
None
Program 80 : Basic Hardware Setup for System
80-14 : DTMF Tone Receiver Setup - 3
Level:
MF
Item
No.
Item Input Data Default
01
Received Dialed
0 ~ 13 [-6dB (1) - 0dB (7) - +6dB (13)]
0dB (7)
02
Detect Type
0 = Type 1 (Normal)
1 = Type 2 (Improvement of DTMF mis-
detection)
0