Issue 4.0
2-408 Program 25 : VRS/DISA Setup
Description
Use Program 25-06 : VRS/DISA One-Digit Code Attendant Setup to set up single digit dialing through
the VRS. This gives VRS callers single key access to extensions, the company operator, Department
Calling Groups and Voice Mail. For each VRS message set to answer outside calls (refer to Program 25-
04 and 25-05), you specify:
The digit the VRS caller dials (0~9, , #). Keep in mind that if you assign destinations to digits, outside
callers cannot dial system extensions.
The destination reached (eight digits max.) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice Mail master
number. A one-digit code can be assigned for each Automated Attendant message.
Example:
Message Number=01, Destination=2, Next Message Number=0, Dial=399
In this example, when 2 is dialed by an outside caller, the system transfers the call to 399. This means
that extension 200~299 cannot receive calls from VRS/DISA users during/after VRS Message 01.
Program 25 : VRS/DISA Setup
25-06 : VRS/DISA One-Digit Code Attendant Setup
Level:
IN
Input Data
Attendant Message Number 01~100
Received Dial 1~9, 0,
, #
Item
No.
Item Input Data Default
01
Next Attendant Message
Number
0~100
0 = No Setting
101 = Voice Mail answers
104 = Refer to 25-04 : VRS/DISA Transfer
Ring Group With No Answer/Busy
105 = Dial the other extension
0
02
Destination Number
Up to eight digits
No Setting
To Next Page
Loading...
