NEC Univerge SV9100 - Netlink Primary Compulsion Specification Setting

Issue 4.0
SV9100 Programming Manual 2-657
Description
Use Program 51-07 : NetLink Primary Compulsion Specification Setting to set compulsion
specification of the Primary system.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-07 : NetLink Primary Compulsion Specification Setting
Level:
IN
Item
No.
Item Input Data Default
01
Forced Change Primary System Enabling
Set whether or not the Forced Change Primary is available.
0 = Disable
1 = Enable
0
02
Package Reset Timing Option
When Forced Change Primary System is done, all packages
reset. Select the package reset timing.
0 = Reset when all packages are idle, otherwise reject
Primary System Integration.
1 = Anytime
0 = On
1 = Off
0