NEC Univerge SV9100 - DT800;DT700 Multiline Terminal Version Information

Issue 4.0
SV9100 Programming Manual 2-863
Description
Use Program 90-42 : DT800/DT700 Multiline Terminal Version Information to set the hardware
version and firmware version of the DT800/DT700 MLT Terminal.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-42 : DT800/DT700 Multiline Terminal Version Information
Level:
IN
Input Data
Terminal Type
1 = ITL-**E-1D/IP-*E-1
2 = ITL-**D-1D/ITL-24BT-1D/ITL-24PA-1D
3 = ITL-320C-1
4 = Not Used
5 = ITL-**DG-3
6 = ITL-**CG-3
7 = ITL-2CR-1
8 = ITZ-**D-*D/ITZ-**PD-*D/ITZ-**pA-*D/ITZ-**DG/ITZ-**LDG/ITZ-**LD
9 = ITZ-**CG
10 = ITY-6D
11 = ITY-8LDX
Item
No.
Item Input Data Default
01
Software Version
00.00.00.00~FF.FF.FF.FF
00.00.00.00
02
Hardware Version
00.00.00.00~FF.FF.FF.FF
00.00.00.00