NEC Univerge SV9100 - Hotel;Motel Telephone Setup

Issue 4.0
2-538 Program 42 : Hotel Setup
Description
Use Program 42-02 : Hotel/Motel Telephone Setup to define the basic operation of the Hotel/Motel
extensions.
Program 42 : Hotel Setup
42-02 : Hotel/Motel Telephone Setup
Level:
IN
Input Data
Extension Number 001 ~ 960
Item
No.
Item Input Data Default
01
Hotel Mode
If you want an extension to operate in the Hotel/
Motel mode, enter 1. If you want the telephone to
operate in the business mode, enter 0.
0 = Normal
1 = Hotel
0
02
Toll Restriction Class When Check In
Assign an extension Toll Restriction Class when
it is checked in. The system has 15 Toll
Restriction Classes (1~15). The entry you make
in this option affects the telephone in all Night
Service modes. (Refer to Programs 21-05 and
21-06 to set up the Toll Restriction dialing
options.) When the extension is checked out, it
uses the Toll Restriction Class set in Program
21-04.
1~15
1
03
Room Status
This is a read only setting that shows the current
room status setting.
(Read Only)
Room Clean (Occupied)
Maid Required
Maid in Room
Inspection Required
Maintenance Request
Out of Order
Reserve 1
Reserve 2
Reserve 3
Room Clean (Vacant)
Reserve 5
Reserve 6
N/A