NEC Univerge SV9100 - Door Box Basic Setup

Issue 1.0
SV9100 Programming Manual 2-469
Description
Use Program 32-03 : Door Box Basic Setup to select the chime pattern and gain level for each Door
Box. There are six distinctive chime patterns. The chime tones are defined in 80-01 : Service Tone
Setup on page 2-673.
Conditions
None
Feature Cross Reference

Door Box
Program 32 : Door Box and Sensor Setup
32-03 : Door Box Basic Setup
Level:
IN
NOTE

The Door Box feature is called Door Phone when programming via WebPro and using a
multiline terminal.
Input Data
Door Box Number 1~8
Item
No.
Item Input Data Default
01
Chime Pattern
0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
Door Box 1 = 1
Door Box 2 = 2
Door Box 3 = 3
Door Box 4 = 4
Door Box 5 = 5
Door Box 6 = 6
Door Box 7 = 1
Door Box 8 = 1
02
CODEC Transmit Gain Setup
(PGD(2)-U10 ADP to Door Box)
1~57 (-15.5dB ~ +12.5dB)
32
03
CODEC Receive Gain Setup
(Door Box to PGD(2)-U10 ADP)
1~57 (-15.5dB ~ +12.5dB)
32