NEC Univerge SV9100 - Programmable One-Touch Keys

Issue 4.0
2-224 Program 15 : Extension, Basic Setup
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch key data for each
multiline terminal.
For each UNIVERGE SV9100 Wireless telephone to use the Transfer When Out of Range feature, enter
the destination number (up to 24 digits) and name (up to 12 characters) into One-Touch bin 10. Make
sure to add any required trunk access codes for outside numbers. If this bin information is changed
either through 15-14-01 or through user programming, the destination for the transferred calls is also
changed.
Default
No entries for any extension.
Conditions
None
Feature Cross Reference

One-Touch Keys
Program 15 : Extension, Basic Setup
15-14 : Programmable One-Touch Keys
Level:
IN
Input Data
Extension Number 001 ~ 960
Key Number 01~10
Item
No.
Dial Data Name Default
01
1~0,
, #, Pause, Hookflash,
@ (Code for Answer-Wait)
Up to 24 digits
Up to 24 Digits No Setting
02 Name Up to 12 Digits No Setting