NEC Univerge SV9100 - External Paging Zone Group

Issue 4.0
SV9100 Programming Manual 2-461
Description
Use Program 31-04 : External Paging Zone Group to assign each External Paging zone to an
External Paging group. Users call the External Paging group when broadcasting announcements to the
external zone. When programming, the zones on the PGD(2)-U10 ADP are numbers 1~8. On the
UNIVERGE SV9100 system, the GCD-CP10 zone is number 9.
To simplify programming and troubleshooting, always make the External Paging Zone Group the same
number as the External Paging zone (i.e., 1 = 1, 2 = 2, etc.).
Conditions
None
Feature Cross Reference

Paging, External
Program 31 : Paging Setup
31-04 : External Paging Zone Group
Level:
IN
Input Data
External Speaker Number 1~9
Item
No.
Paging Group
Number
Default
01 0~8 (0 = No Setting) Speaker 1 [PGD(2)-U10 ADP] = 1 (Group 1)
Speaker 2 [PGD(2)-U10 ADP] = 2 (Group 2)
Speaker 3 [PGD(2)-U10 ADP] = 3 (Group 3)
Speaker 4 [PGD(2)-U10 ADP] = 4 (Group 4)
Speaker 5 [PGD(2)-U10 ADP] = 5 (Group 5)
Speaker 6 [PGD(2)-U10 ADP] = 6 (Group 6)
Speaker 7 [PGD(2)-U10 ADP] = 7 (Group 7)
Speaker 8 [PGD(2)-U10 ADP] = 8 (Group 8)
Speaker 9 (GCD-CP10) = 1 (Group 1)