NEC Univerge SV9100 - CCIS Destination System Settings

Issue 4.0
2-634 Program 50 : Common Channel Interoffice Signaling Service
Description
Use Program 50-03 : CCIS Destination System Settings to assign information of remote systems in a
CCIS Network.
Conditions
None
Feature Cross Reference
None
Program 50 : Common Channel Interoffice Signaling
Service
50-03 : CCIS Destination System Settings
Level:
IN
Input Data
CCIS System ID 1~255
Item
No.
Item Description Input Data Default
01
Destination Point Code Define the Point Code at the Destination Party.
0~16367
0
02
CCIS Route ID
(T1 only)
Select the CCIS Route ID defined in Program
14-13 when the user tries to access the system
in a CCIS network.
0~8
(CCIS Route IDs 5~8
are for future use and
should not be used.)
0
03
IP Address
(IP only)
Assign the IP Address to a CCIS System ID.
xxx.xxx.xxx.xxx
(xxx = 0~255)
0.0.0.0
04
Point Code Availability Define if the system associated with
Destination Code can be Reached (1) or Not
Reached (0). If set to 0, when using the IP-
CCIS, that system cannot be called until it is
set to 1.
0 = Disable
1 = Enable
1