NEC Univerge SV9100 - Class of Service Options (Outgoing Call Service)

Issue 4.0
SV9100 Programming Manual 2-259
Description
Use Program 20-08 : Class of Service Options (Outgoing Call Service) to define the outgoing call
feature availability for each extension Class of Service (COS).
Program 20 : System Option Setup
20-08 : Class of Service Options (Outgoing Call Service)
Level:
IN
Input Data
Class of Service Number 01~15
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
01-14
COS
15
01
Intercom Calls
Turn off or on Intercom calling for the extension.
0 = Off
1 = On
11
02
Trunk Outgoing Calls
Turn off or on outgoing trunk calling for the
extension.
0 = Off
1 = On
11
03
System Speed Dialing
Turn off or on an extension ability to make
outbound calls using system speed dial
numbers.
0 = Off
1 = On
11
04
Group Speed Dialing
Turn off or on an extension ability to make
outbound calls using group speed dial numbers.
0 = Off
1 = On
11
05
Dial Number Preview (Preset Dial)
Turn off or on an extension ability to use Dial
Number Preview.
0 = Off
1 = On
11
06
Toll Restriction Override
Turn off or on Toll Restricting Override (Service
Code 663).
0 = Off
1 = On
0 0 11-11-36
21-01-07
21-07
07
Repeat Redial
Turn off or on an extension ability to use Repeat
Redial.
0 = Off
1 = On
11