Issue 4.0
2-820 Program 90 : Maintenance Program
Description
Use Program 90-06 : Trunk Control for trunk maintenance. Busy Out lets you block a blade from
placing outgoing calls (just like placing the blade switch down). Once busied out, none of the ports on the
blade can be used for new calls. Existing calls, however, are not affected.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-06 : Trunk Control
Level:
SA
This program is available via telephone programming and WebPro but not through PC
Programming.
Input Data
Menu Number
0 = Set Busy Out
1 = Reset Busy Out (idle)
Item
No.
Item Input Data
01
Trunk Control
Trunk Port Number: 001~400
To Next Page
Loading...
