NEC Univerge SV9100 - Hotel Mode One-Digit Service Codes

Issue 4.0
2-542 Program 42 : Hotel Setup
Description
Use Program 42-04 : Hotel Mode One-Digit Service Codes to set up the Hotel Mode one-digit service
codes which are assigned in 42-02-01. For each Department Calling Group (1~64), you enter the
destination for each single digit code (1~9, 0,
, #). The destination can be any code with up to four
digits, such as an extension number or access code.
Conditions
The one-digit service codes you assign in this program wait until the interdigit time expires before executing.
Feature Cross Reference

Hotel/Motel
Program 42 : Hotel Setup
42-04 : Hotel Mode One-Digit Service Codes
Level:
IN
Input Data
Department (Extension)
Group Number
01~64
Item
No.
Received Dial Destination Number Default
01 1~9,0,,# Up to eight digits No Setting