NEC Univerge SV9100 Programming Manual

Issue 4.0
2-388 Program 22 : Incoming Call Setup
Description
Use Program 22-20: Flexible Ringing by Caller ID Setup to set flexible ringing by Caller ID per timer
pattern mode.
Conditions
None
Feature Cross Reference
None
Program 22 : Incoming Call Setup
22-20 : Flexible Ringing by Caller ID Setup
Level:
IN
Input Data
Trunk Port Number 01~400
Day/Night Mode 01~08
Item
No.
Item Input Data Default
01
Flexible Ringing
0 = Disable
1 = Enable
1

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards