NEC Univerge SV9100 - Service Code Setup, Administrative (for Special Access)

Issue 4.0
2-128 Program 11 : System Numbering
Description
Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the
special access Service Codes which are used by the administrator in the Hotel/Motel feature. You can
customize additional Service Codes in Programs 11-10 ~ 11-14 and 11-16.
The following chart shows:
 The number of each code (01~14).
 The function of the Service Code.
 What type of telephones can use the Service Code.
 The default entry.
 Programs that may be affected when changing the code.
Program 11 : System Numbering
11-15 : Service Code Setup, Administrative (for Special Access)
Level:
IN
Input Data
Item
No.
Item
Terminal
s
Default
Related
Program
01
Remote Maintenance
730
02
Access in Dial-In Conversion Table
760 22-04
22-11
03
Backup Data Save
Save the user’s soft key settings (extension
programmed Call Forwards, DND, etc.). This
feature should be used before upgrading the
system software.
MLT #  # 9
04
--- Not Used ---
05
System Programming Mode, Log-On
MLT #  #  11-01
06
--- Not Used ---
07
--- Not Used ---
08
--- Not Used ---
09
Transfer to Incoming Ring Group
No
Setting