NEC Univerge SV9100 - Client Information Setup

Issue 4.0
2-30 Program 10 : System Configuration Setup
Description
Use Program 10-15 : Client Information Setup to set up the client information when the DHCP server
needs to assign a fixed IP address to clients.
Conditions
None
Feature Cross Reference

Voice Over Internet Protocol (VoIP)
Program 10 : System Configuration Setup
10-15 : Client Information Setup
Level:
SA
Input Data
Client Number 1~960
Item
No.
Item Input Data Default
01
The IP address should be
assigned out of the scope range
set up in Program 10-14.
MAC: 00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00
1.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0