NEC Univerge SV9100 - DTMF Tone Receiver Setup

Issue 4.0
2-682 Program 80 : Basic Hardware Setup for System
Description
Use Program 80-03 : DTMF Tone Receiver Setup to define the various levels and timers for the DTMF
Tone Receiver.
DTMF Tone Receiver Type:
 1 = DTMF Receiver for Extension
 2 = DTMF Receiver for Analog Trunk
 3 = DTMF Receiver for Digital Trunk
 4, 5 = Reserved
Program 80 : Basic Hardware Setup for System
80-03 : DTMF Tone Receiver Setup
Level:
MF
Input Data
DTMF Tone Receiver Type No. 1 = DTMF Receiver for Extension
2 = DTMF Receiver for Analog Trunk
3 = DTMF Receiver for Digital Trunk
4 = --- Reserved ---
5 = --- Reserved ---
Item
No
Item Input Data
01
Detect Level
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
02
Start Delay Time
0~255 (0.25ms ~ 64ms)