Issue 4.0
SV9100 Programming Manual 2-5
Description
Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data for each blade.
When changing a defined terminal type, first set the type to 0 and then plug the new device in to have
the system automatically define it or you may have to reseat the blade.
For CNF PKG Setup
For DLCA PKG Setup s
Program 10 : System Configuration Setup
10-03 : ETU Setup
Level:
IN
The items highlighted in gray are read only and cannot be changed.
Input Data
Physical Port Number 01~32
Item
No.
Item Input Data Default
02
Logical Port Number
0~960 0
Input Data
Physical Port Number 01~16
To Next Page
Loading...
