NEC Univerge SV9100 - IP Trunk (H.323) Calling Party Number Setup for Extension

Issue 4.0
SV9100 Programming Manual 2-353
Description
Use Program 21-18 : IP Trunk (H.323) Calling Party Number Setup for Extension to assign the
Calling Party Number for each extension. The assigned number is sent to the exchange when the caller
places an outgoing call.
Conditions
None
Feature Cross Reference
None
Program 21 : Outgoing Call Setup
21-18 : IP Trunk (H.323) Calling Party Number Setup for Extension
Level:
IN
NOTE

When the Calling Party Number is assigned by PRG 21-17, 21-18 and 21-19, the system
uses the data in PRG 21-18 and PRG 21-19.
Input Data
Extension Number 001 ~ 960
Item
No.
Description Input Data Default
01
IP Trunk (H.323) Calling Party Number Setup for
Extension
Up to 16 digits
(0~9,
, #)
None