NEC Univerge SV9100 - Service Code Setup (for Setup;Entry Operation)

Issue 4.0
2-116 Program 11 : System Numbering
Description
Use Program 11-11 : Service Code Setup (for Setup/Entry Operation) to customize the Service
Codes which are used for registration and setup. You can customize additional Service Codes in
Programs 11-10, and 11-12 ~ 11-16.
The following chart shows:
 The number of each code (01~65).
 The function of the Service Code.
 What type of telephones can use the Service Code.
 The default entry. For example, dialing 725 (Item 18) allows users to turn on or turn off Background
Music.
Program 11 : System Numbering
11-11 : Service Code Setup (for Setup/Entry Operation)
Level:
IN
Input Data
Item
No.
Item
Terminal
s
Default
Related
Program
01
Call Forward – All
MLT, SLT 741
02
Call Forward – Busy
MLT, SLT 742
03
Call Forward – No Answer
MLT, SLT 743
04
Call Forward – Busy/No Answer
MLT, SLT 744
05
Call Forward – Both Ring
MLT, SLT 745
06
--- Not Used ---
07
Call Forwarding – Follow-Me
MLT, SLT 746
08
Do Not Disturb
MLT, SLT 747
09
Answer Message Waiting
MLT, SLT 0 11-10-16
10
Cancel All Messages Waiting
MLT, SLT 773
11
Cancel Message Waiting
MLT, SLT 771
12
Alarm Clock
MLT, SLT 727 20-01-06