NEC Univerge SV9100 - Page 157

Issue 4.0
SV9100 Programming Manual 2-117
13
Display Language Selection for Multiline
Terminal
MLT 678 15-02
14
Text Message Setting
MLT No
Setting
15
Enable Handsfree Incoming Intercom Calls
MLT 721 20-09-05
20-02-12
16
Force Ringing of Incoming Intercom Calls
MLT 723 20-09-05
20-02-12
17
Programmable Function Key Programming
(2-Digit Service Codes)
MLT 751 15-07
11-11-38
18
BGM On/Off
MLT No
Setting
19
Key Touch Tone On/Off
MLT 724
20
Change Incoming CO and ICM Ring Tones
MLT 720 15-02
21
Check Incoming Ring Tones
MLT 711
22
Extension Name Programming
MLT 700 15-01
23
Second Call for DID/DISA/DIL
MLT 679
24
Change Station Class of Service
Allow an extension user to change the COS of
another extension. Must be allowed in Program
20-13-28.
MLT 677 20-13-28
25
Automatic Transfer Setup for Each Extension
Group
MLT, SLT 602 20-11-17
24-05
26
Automatic Transfer Cancellation for Each
Extension Group
MLT, SLT 603
27
Destination of Automatic Transfer Each
Extension Group
MLT 604 20-11-17
24-05
28
Delayed Transfer for Every Extension Group
MLT, SLT 605 20-11-17
24-05
24-02-08
29
Delayed Transfer Cancellation for Each
Extension Group
MLT, SLT 606 20-11-17
30
DND Setup for Each Extension Group
MLT, SLT 607
31
DND Cancellation for Each Extension Group
MLT, SLT 608
32
--- Not Used ---
33
Dial Block
MLT, SLT 600
34
Temporary Toll Restriction Override
MLT, SLT 775 21-07
Input Data (Continued)
Item
No.
Item
Terminal
s
Default
Related
Program