NEC Univerge SV9100 - Program 92: Copy Program; Delete All Extension Numbers

Issue 4.0
SV9100 Programming Manual 2-895
Description
Use Program 92-02 : Delete All Extension Numbers to delete all extension numbers. However, the
extension number of the first port is not deleted.
Conditions
None
Feature Cross Reference
None
Program 92 : Copy Program
92-02 : Delete All Extension Numbers
Level:
IN
NOTE

This program is available only via telephone programming and not through PC
Programming.
Input Data
Extension No. Delete Yes: 1 [Dial 1] + Transfer key (Only press Transfer
key is canceled)