NEC Univerge SV9100 - Netbios Setting

Issue 4.0
SV9100 Programming Manual 2-83
Description
Use Program 10-62 : NetBIOS Setting to set the NetBIOS which is used to access WebPro of SV9100
using HTTP and HTTPS.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-62 : NetBIOS Setting
Level:
IN
Input Data
Area Table 1~8
Item
No.
Item Input Data Default
Related
Program
01
NetBIOS Setting
- NetBIOS Mode
Enable/Disable
NetBIOS Mode.
0 = Disable
1 = Enable
1
02
NetBIOS Setting
- NetBIOS Name
Assign the
NetBIOS name
up to 15
characters
Up to 15 characters
SV9100