NEC Univerge SV9100 Programming Manual

Issue 4.0
2-658 Program 51 : NetLink Service
Description
Use Program 51-08 : Primary NetLink Setting to set the IP address and system ID of the compulsory
specification of the Primary system.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-08 : Primary NetLink Setting
Level:
IN
IMPORTANT
This program is available only via telephone programming and not through PC
Programming.
Item
No.
Item Input Data Default
01
IP Address of New Primary System
Enter target IP address for New Primary system. When the
Forced Change Primary system is done, this setting is
erased.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02
System ID of New Primary System
When set to 0, top priority Primary system is assumed to
be the new Primary system.
0~50
No
setting

NEC Univerge SV9100 Specifications

General

VoIP Support	Yes
VoIP Protocols	SIP, H.323
Voicemail	Integrated voicemail
Networking	Yes, via IP
Unified Communications	Yes
Mobility	Supports mobile extensions and applications
Type	IP-PBX
Network Interfaces	Gigabit Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Weight	Varies depending on chassis and expansion cards