NEC Univerge SV9100 - ISDN-BRI Setup

Issue 4.0
2-20 Program 10 : System Configuration Setup
Description
Use Program 10-06 : ISDN - BRI Setup to configure the ISDN - BRI Terminal Endpoint Identifier (TEI),
mode of operation, and Service Profile Identifier (SPID) number for each circuit B-Channels.
Conditions
None
Feature Cross Reference

ISDN Compatibility
Program 10 : System Configuration Setup
10-06 : ISDN-BRI Setup
Level:
IN
Input Data
SLOT Number 1 ~ 24
ISDN - BRI Circuit 1 ~ 4
Item
No.
Item Input Data Default
01
TEI Selection
Select the method the system
uses when assigning Terminal
Endpoint Identifier (TEI) values
to BRI ports.
0 = Select by SPID number
1 = Select by Channel ID number
0
02
DID Mode
0 = Route by Called Party Number
1 = Route by Redirecting Number
0
03
SPID 1
Dial up to 20 digits
No Setting
04
SPID 2
Dial up to 20 digits
No Setting